17-03-2011 02:46 PM - edited 17-03-2011 03:14 PM
Using the Safe Mode function on your PlayStation 3?
Solved! Go to Solution.
17-03-2011 03:11 PM - edited 20-12-2012 10:30 AM
Using the Safe Mode function on your PlayStation 3?
The option to use Safe Mode on the PlayStation 3 was introduced if a problem occurs where it will no longer start up normally.
To use this feature the console will need to have the System Software update 2.60 (or later).
When to Use Safe Mode?
Safe Mode procedure:
1) Ensure the PlayStation 3 is in standby mode (where the red light is apparent), and then turn the console off at the mains switch.
2) Turn the mains power on, then while in standby touch and hold the power button.
3) Keep your finger pressed on the power button (after 5 seconds you will hear a beep).
4) After 10 seconds of holding your finger on the power button, you will hear a second beep and the console will shut down (you can remove your finger).
5) Touch and hold the power button again.
6) Again hold your finger down on the button until you hear another beep after 5 seconds.
7) A number of seconds after this you will hear a double beep- you can remove your finger.
8) You will be prompted to plug your controller in and press the PS button on your controller. After doing so you will access the Safe Mode menu with a number of options.
Safe Mode Option Screen:
Selecting this option will start up the system normally- It will also allow you to exit the Safe Mode Menu.
Selecting this option will restore Default settings on your console (when starting the unit you will be prompted to set time, time zone etc). This option will also delete your PlayStation Network account information from the system.
Your User information will be deleted and restored- the indicator will be an asterix by your username e.g. *RabidWalker.
When logging into your user you will encounter no issues with disc based games. However when attempting to play PSN downloaded games you may encounter the message:
‘To access the system, you must activate the system.
Go to [PlayStation Network] > [Account Management] to activate this system. (80029514). ’
Follow the instruction to activate your PlayStation 3 to play downloaded games (if the system is activated, deactivate and reactivate the system)
This option will begin a process to repair data on your Hard Disk Drive. Therefore it will check for any corrupted data and try and recover this. It the data cannot be recovered it may be erased to ensure that it does not interfere with the operation of the PlayStation 3.
If issues continue to persist and you select this option please note that data will be removed during this process.
The following information will removed:
- User changes to Information Screens
- User changes to Picture under Photos
- Video Thumbnails
- Video Playback History
- Video Resume Information
This process may take same time to complete
The option to restore PS3 system is the same as the ‘quick format’ option on the XMB menu. It will reformat the HDD, removing all data and restoring the Hard drive to its original state.
Selecting this option will install the PlayStation 3 Update but only if the update is on an external media storage device plugged into the console.
This option can be used if any issues are encountered with the installation of the System software update.
If you have any queries regarding this or any other issues please PM me or catch me on Twitter
on 19-05-2012 08:19 PM
i have a problem with starting into safe mode, i get nothing, no menu but the system does restart...
i turned my ps3 on yesterday after a 3 week rest from playing it and it started an update, i came back after 10mins and the screen was blank with a green light on the console...
do you know if i can get this fixed on warrenty without having the paperwork, although i do have proof of when i bought it and signing onto the ps network..
any help you can give to save me sending it away for repair would be a great help.
on 25-05-2012 11:01 PM
I can get to safe mode no problem, My issue is I'm unable to use my controllers my playstation wont recognise them?
I have tried connecting them with the usb cable and pressing the ps button, the red light just flash.... Then nothing!
on 30-06-2012 10:16 PM
on 30-06-2012 10:30 PM
12-07-2012 08:06 AM - edited 12-07-2012 08:11 AM
Thanks for your help! You saved my PS3 and a trip to repairer. I was using vidzone for about 1.5 hours and the screen suddenly froze. I couldn't get it to restart properly and keep getting a frozen and then a black screen. Thanks to your tip and i tried to restart it in safe mode and the retore the setting and somehow it's working again now!
on 24-07-2012 12:05 PM
i followed the steps it works fine then when i sign in within a afew seconds it cuts off and gets a red flashing light again i dont know what to do :/
on 15-09-2012 09:33 PM
on 17-09-2012 07:34 AM
Welcome to the PlayStation 3 Technical Help Forum!
Here you can post questions regarding any technical problem you may be having with your PlaySation 3.
Before you post you can search for your query as it may have already been answered. You can also try our FAQ's when looking for help.
To use this board, simply post your question and wait for it to be answered. Your question may be given an ‘Accepted Solution’ – this is an answer which has been accepted as the best solution to your problem.
Website ©2013 Sony Computer Entertainment Europe
All content, game titles, trade names and/or trade dress, trademarks, artwork and associated imagery are trademarks and/or copyright material of their respective owners. All rights reserved. [more info]