on 12-09-2012 09:06 AM
Today I tried to update my PS3 to 4.25 and half way through downloading the update, my wireless cut out and the update stalled. (what I think could be a cause)
After restarting it and successfully completing the download, the installation begun but gets all the way to 99%
Then, after about 10 minutes the an error message pops up and the installation begins again. After leaving it on for hours and after numerous restarts, I tried opening up recovery mode on the ps3. Needless to say it's just my luck that recovery mode would not start. So now I'm stuck looking at 99% and no solution in sight.
Any help is greatly appreciated, have been grabbing at straws all day!
on 12-09-2012 09:14 AM
on 12-09-2012 09:51 AM
Try the below suggestions:
Reboot the PS3 and try to update again.
if the error occurs again, try updating a different way.
If you updated the PS3 directly on the PS3, try updating from a PC.
If you updated from the update from downloaded from a PC, then update on the PS3.
If you continue to have issues, go in to Safe Mode and select "Restore File System". After that process completes, try updating the PS3 again.
If the above does not work then contact PlayStation Support for further assistance.
on 12-09-2012 11:56 AM
12-09-2012 03:24 PM - edited 12-09-2012 03:25 PM
So I used my laptop hard drive and a USB with update 4.21 on it to install and it worked fine, but it then prompted me to download and install 4.25 again, which one again stops on 99% and keeps restarting. This is so frustrating!
I had the same problem
I`m also on a wireless network.
And i did this :
Shutdown the ps3, remove your hard drive, put in another hard drive, Download the update from the playstation site and put it on a usb stick (under PS3 -> UPDATE) then plug it in the ps3, turn on the ps3 and on the screen that follows, press start & Select and on the screen for the format, press & hold Start & Select for 5 seconds, he then will format and after that he will update your console to the firmware 4.25.
When you get the screen to choose your language, shutdown the console and replace the hard drive with your other (original) hard drive and restart the ps3 and he will restart normally and if you go to system information, you will see that it is firmware 4.25. (and there is nothing lost)
For me, it`s worked this way and i have nothing lost and can resume gaming.
4.25 update stuck at 99%
i try above solution. it's work for me.
Welcome to the PlayStation 3 Technical Help Forum!
Here you can post questions regarding any technical problem you may be having with your PlaySation 3.
Before you post you can search for your query as it may have already been answered. You can also try our FAQ's when looking for help.
To use this board, simply post your question and wait for it to be answered. Your question may be given an ‘Accepted Solution’ – this is an answer which has been accepted as the best solution to your problem.
Website ©2013 Sony Computer Entertainment Europe
All content, game titles, trade names and/or trade dress, trademarks, artwork and associated imagery are trademarks and/or copyright material of their respective owners. All rights reserved. [more info]