Reply
Member
Rexel99
Posts: 6
Registered: 29-07-2009
Message 1 of 4 (685 Views)

VidZone audio quality

I have trouble getting good audio quality from Vidzone.

I have the audio through hdmi to my tv, then from the tv to my amp through an optical lead.

All work fine normally, games, movies, blue ray, even the ABC iView video streaming, but not in VidZone.

The audio is quite distorted, most clips (like boom boom) sound rubbish. Buzzy base and just fuzzy bad.

Using the basic left/right two channel audio leads direct to the amp work ok, but of course not as full surround in this format as the best method (described above).

 

Any other ideas/similar experiences?

Share
Please use plain text.
Member
hgwells
Posts: 1,276
Registered: 05-12-2008
Message 2 of 4 (672 Views)

Re: VidZone audio quality

Rexel99, 

to eliminate the TV as the source of the distortion, take the optical lead out of the TV, and plug it into the PS3 instead. You will need to set the audio options to both HDMI and optical - see the manual for details.

 

If this works, then you may need to invest in an optical switch, and another optical lead, to restore your TV audio output feed to your amp.

Share
Please use plain text.
Member
Rexel99
Posts: 6
Registered: 29-07-2009
Message 3 of 4 (657 Views)

Re: VidZone audio quality

Thanks, yeah sorta expected to try and test that, with expense and even if that worked, no real joy...

 

But it would still raise the issue, why is all other audio from the PS3, through the TV ok as it is, except for VidZone audio?

Why would that be any different to anything else produced by the machine or apps including games or especially the iView video streaming?

Share
Please use plain text.
Beta Tester
Brakkvatn
Posts: 22
Registered: 20-02-2007
Message 4 of 4 (401 Views)

Re: VidZone audio quality

I have the same problem myself. Have you found a solution? Might it just be bad quality on the videos streamed from Sony?

Share
Please use plain text.
Announcements

Welcome to the Technical Help Board!

Here, you can post questions regarding any technical problem you may be experiencing.

Before using this section, be sure to check out our Technical Solutions board and follow the instructions there to see if your problem has already been solved.

To use this board, simply post your question and wait for it to be answered. Your question may be given an ‘Accepted Solution’ – this is an answer which has been accepted as the best solution to your problem.